好看的言情小说,完结小说

中文|English

Your Current Position: NEWS CENTER

19

2019-01

【Technical article】 Common Faults and Maintenance Strategies of Valves

First, external damage is caused by material defects. The manufacturing process of valves is very complicated. If the valve produces blowhole or slag inclusion during casting, these defects may expand and cause damage, resulting in fluid leakage.
12

2019-01

【Technical article】 Do you know the type and pressure grade of flange and sealing surface?

Flange sealing surface type introduced flange sealing surface according to the working condition, medium, pressure, specifications, temperature and other conditions, so the type of choice is not the same.
05

2019-01

【Industry trends】 Characteristics of Valve Manufacturing Technology

Compared with other mechanical manufacturing processes, valve manufacturing process has the following characteristics.
30

2018-12

【Industry trends】 The key valve of the large-diameter pressure regulating device and the anti-surge valve of the compressor successfully passed the national new product appraisal

Recently, the China Machinery Industry Federation and China General Machinery Industry Association, entrusted by the State Energy Administration, hosted the "New Product Appraisal Meeting of Key Valves and Compressor Anti-surge Valves for ...
22

2018-12

【Industry trends】 The first international standard for LNG marine cryogenic valves, which was led by China, was officially released.

China's first international standard for LNG marine equipment, ISO 21157:2018, Design and Test Requirements for Low Temperature Ball Valves for Ships and Offshore Technologies, ISO 21159:2018...
15

2018-12

【Industry trends】 Experts: there is a "trick" to judge the leakage of vacuum valve

Step 1: gate valve leakage, energy consumption accounting "know". The energy consumption accounting done by the device every day is the same as that of yesterday.
08

2018-12

【Industry trends】 The 13th China international symposium on urban water resources development and the exposition on new technologies and equipment

On November 29, 2018, the 13th China urban water affairs development international seminar and new technology and equipment expo was held in chongqing yuelai international convention and exhibition center as scheduled.
01

2018-12

【Industry trends】 The Ministry of Industry and Information Technology approved four valve standards to be implemented on December 1, 2018.

The Ministry of Industry and Information Technology recently approved a number of industry standards, of which four valve standards will be implemented on December 1, 2018.
24

2018-11

【Technical article】 Cause analysis of defects in valve casting during production

1. The stomataThis is a small cavity formed by the gas that cannot be escaped from the metal during solidification. Its inner wall is smooth and contains gas, and it has a high reflectivity to ultrasonic wave.
17

2018-11

【Industry trends】 Serious leakage valve brings back to life

On the morning of November 10, several young people wearing red overalls were sweating around a replaced valve on the YT2-10H well site of the second production area of No. 1 Oil Production Plant of Northwest Oilfield.

First <Previous ... 22 23 24 25 26 27 28 29 30 ... Next> End

TOP

QQ客服

+86-027-84805675

[email protected]